Hood (Bonnet) and Fittings

This washer is found all over the cars from 1955-1997 Front Door Hinge Transmission Gear Change Volute Casing Thermostat Front Suspension Spring Cylinder Head Manifold Air Pressure Sensor (2bar) Fuel Injection Fuel Rail Dashboard Instrument Handbrake...

This is the hood/bonnet chrome retaining bolt for the moulding strip. 1966-1980 Silver Shadow, T-series, Shadow II, T-2, Silver Wraith II

Rear Hood Seal (the one closest to the windshield under the hood) 1966-1980 Shadow, Shadow II, T-series, T-2, Corniche Coupe & Corniche Convertible 1981-1997 Corniche, Eight, Mulsanne, Spirit, Spur & Turbo

This is the hard seal that pushes onto the internal lip of both the bonnet (hood) and boot (trunk).  Sold per foot.  The lengths required are below: Shadow 1 bonnet 1.4 metres = 4.593"Shadow 2 bonnet 1 metres = 3.29"Shadow 1 & 2 Boot 6...

.125UNF x 1.250 long Bolt has many areas found on the car.  Cloud I & S1 - Exhaust Manifold to Downpipe (3 bolts per manifold); Center, Front Silencer & Tail Pipe Silencer (6 bolts) & 12 bolts needed for Complete Exhaust  Cloud...

These are the rubber grommet for the two hood catch mechanisms.  These grommets sit in the radiator grille shell mounts. Note: 2 Per hood catch (Sold Each) 1966-1980  Silver Shadow, T-series, Shadow II, T-2, Silver Wraith II 1980-1998 ...